The cutting clutch is electrical-magnet while the CE standard double-hydraulic system is option).The major low-voltage parts are imported, like OMRON、ABB、 SCHNEIDER、 MOLLER and so on. The main control parts are controlled by PLC. The hydraulic part are fast pres- sure boost system and the pressure can be adjusted( the self-lock and double-way hydraulic system is option). The knife change system is very convenient owing to the knife hanging device.
|
Technical Parameters |
Unit |
Value |
|
Maximum cutting length |
mm |
2000 |
|
Maximum cutting width |
mm |
1760 |
|
Maximum cutting height |
mm |
165 |
|
Minimum cutting (without pressure plate) |
mm |
35 |
|
Minimum cutting (including pressure plate) |
mm |
120 |
|
Length(cutting point to front table) |
mm |
750 |
|
Length(cutting point to back table) |
mm |
2620 |
|
Height of working platform from ground |
mm |
900 |
|
Additional platform length |
mm |
650（750） |
|
Additional platform width |
mm |
750（1000） |
|
Platen pressure (minimum) |
KN |
3 |
|
Platen pressure (maximum) |
KN |
70 |
|
Blade specifications |
mm |
13.75 |
|
Sharpening place (maximum) |
mm |
60 |
|
Cutting speed |
t/m |
45 |
|
Main motivation |
KW |
7.5 |
|
Voltage |
V |
361-399 |
|
Wire thickness |
mm2 |
4 |
English
中文
